Place of Origin: | TAIWAN |
Brand Name: | NXP |
Certification: | ROHS |
Model Number: | 74HCT595D |
Minimum Order Quantity: | 10PCS |
---|---|
Price: | NEGOTIABLE |
Packaging Details: | 2500PCS/REEL |
Delivery Time: | 2-3DAYS |
Payment Terms: | T/T, Western Union |
Supply Ability: | 50000PCS |
Counting Sequence: | Serial To Serial/Parallel | Number Of Circuits: | 1 |
---|---|---|---|
Number Of Bits: | 8 Bit | Logic Family: | HCT |
Logic Type: | CMOS | Number Of Input Lines: | 1 |
Output Type: | 3-State | Propagation Delay Time: | 25 Ns |
Supply Voltage - Min: | 4.5 V | Supply Voltage - Max: | 5.5 V |
Minimum Operating Temperature: | - 40 C | Maximum Operating Temperature: | + 125 C |
Number Of Output Lines: | 9 | Width: | 4 Mm |
Factory Pack Quantity: | 2500 |
74HCT595D Counter Shift Registers CMOS low power dissipation High noise immunity 8-bit serial input 8-bit serial or parallel output
1.General description
The 74HC595; 74HCT595 is an 8-bit serial-in/serial or parallel-out shift register with a storageregister and 3-state outputs. Both the shift and storage register have separate clocks. The devicefeatures a serial input (DS) and a serial output (Q7S) to enable cascading and an asynchronousreset MR input. A LOW on MR will reset the shift register. Data is shifted on the LOW-to-HIGHtransitions of the SHCP input. The data in the shift register is transferred to the storage registeron a LOW-to-HIGH transition of the STCP input. If both clocks are connected together, the shiftregister will always be one clock pulse ahead of the storage register. Data in the storage registerappears at the output whenever the output enable input (OE) is LOW. A HIGH on OE causes theoutputs to assume a high-impedance OFF-state. Operation of the OE input does not affect thestate of the registers. Inputs include clamp diodes. This enables the use of current limiting resistorsto interface inputs to voltages in excess of VCC
2.Features and benefits
ide supply voltage range from 2.0 to 6.0 V
• CMOS low power dissipation
• High noise immunity
• 8-bit serial input
• 8-bit serial or parallel output
• Storage register with 3-state outputs
• Shift register with direct clear
• 100 MHz (typical) shift out frequency
• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B• Complies with JEDEC standards:• JESD8C (2.7 V to 3.6 V)
• JESD7A (2.0 V to 6.0 V)
• Input levels:
• For 74HC595: CMOS level
• For 74HCT595: TTL level
• ESD protection:• HBM JESD22-A114F exceeds 2000 V
• MM JESD22-A115-A exceeds 200 V
• Multiple package options
• Specified from -40 °C to +85 °C and from -40 °C to +125 °C
3.Applications
Serial-to-parallel data conversion
Remote control holding register
4.Pin configuration for SOT109-1 (SO16) andSOT403-1 (TSSOP16)
Contact Person: Mr. 段
Tel: 86-755-82715827
Fax: 86-755-22678033
Smallest GSM GPRS Module SIM800C 0.35 Kg Lightweight Low Power Consumption
Combo Chip 3G GSM GPRS Module SIM808 SIMCOM Quad Band GPS GPRS Module
Dual band GSM GPRS Module 900/1800MHz Stable Performance RoHS Complaint
High Speed U7500 GSM GPRS Module With HSPA/UMTS/EDGE Wireless Single Band
USB 2.0 Interface LTE Modem Module LTE FDD B13 B17 700bcMHz NGFF ME206v- 561
4G To WiFi LTE GSM Module Security Monitoring For 38 Board All Netcom Video
Power Supply Huawei LTE Module ME906s-158 Module EDGE GSM GPRS Module
Full Netcom LTE 4G Module Wireless Downstream 450Mbps Unicom L850-GL
4 Layer PCB Assembly High Volume Medical Printed Circuit Assembly
FR-4 PCB Board Assembly Flash Gold Finger Surface Finish 0.3mm BGA Pitch
Through Hole PCB Assembly Immersion Gold Surface Finish With SMT DIP Service
Full Turnkey PCB Board Assembly Aluminium Based Board Max 1.8KG 600*400*4.2